Suzhou North Star Lamp Co., Ltd.
Main products:Led module,power supply,Led panel light
Contact Us
  • Contact Person : Ms. Chan Summy
  • Company Name : Suzhou North Star Lamp Co., Ltd.
  • Tel : 86-512-58978376
  • Fax : 86-512-58978376
  • Address : Jiangsu,Zhangjiagang,24/F, A Building, Guotai Times Square,
  • Country/Region : China
  • Zip : 215600

Hot Remote LED controller 180W DC12V controller

Hot Remote LED controller 180W DC12V controller
Product Detailed
DC12V controller 1. Output Power: 180W 2. Input Voltage: DC12V 3. Output Current: 5A per channel 4. Size: 8.3"*1.6"*1"

DC12V controller 

Product Attributes

DC input voltage12V
Output power 5A(Max)per channel, 12V:180W 
Size 211(L)X40(W)X30(H)mm 
Remote distance 50 meters 
Weight 310G 

 Product Speciality:1. Under the control of wireless, the effective remote control distance is 50 meters.

2. 3 channel RGB control, the max current of each channel up to 5A.3. Multi-Mode to select,with Pause function.4. Mode,suspend power memory function.

5. 8 levels brightness adjustment.

6. 8 levels of speed adjustment.



Change Mode Instruchion

Mode NameMode Description
M1Up slowly dimming
M2Leaning Color Fade
M3Full Color Fade
M4Seven Color Flash
M5M2-M4 Loop

Operation Instruction

The Functions of the buttons: 

A Mode; B Pause; C Speed up; D Speed down

A Mode: Press it to change the mode to the next one;

B Pause: Press it to make the LED stays at the present color, press it again then the color change moves on;

C Speed up: Press it to make the change speed of the LED to a faster level(Default is fastest level);

D Speed down: Press it to make the change speed of the LED to a slower level.

Wiring Instruction



Can control various single color modules and RGB modules with the common anode.

Don't control several CT308-RFs with one remote controller at the same time.

Contents about install

1. The input voltage should be limited in rated range.

2. Do not use it by over load.

3. Installed in suited environment.

4. If the load line was too long,you should link it like a ring as below.

5. The all load must be the module with the common anode.

Troubleshooting Guide

Problem Reason Solution
1. All the lamps were off

**The power wire not connected well or nooutput

**Lamp's power wire not connected well

**Reconnect the power wire orchange a power supply**Reconnect the power wire
2. Some color was offWire of this color not connected wellReconnect the power wire
3. Irregular flickerLine is too long or not connected wellShorten the line or add a amplifier

**Packing: 1pc/inner box,strong carton,or as your request

**MOQ: 1pcs

**Delevery: Within 15days after receiving the deposit.

**Client requirements is warmly welcomed

Hope for your soon reply!

Hot Remote LED controller 180W DC12V controller

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.